The repeater is designed for stainless steel tanks and extends the range of your hydrometer.
Continuous automatic logging is maintained even when your phone, tablet or Raspberry is further away from the tank.
It is waterproof and can only be connected to one tilt at a time. Likewise, the repeater updates at least every 2 minutes.
Battery life is approximately 6 months and can be recharged.
The repeater can be placed in a refrigerator along with a keg or fermenter to relay the signal to phones, tablets and Raspberry Pi logging solutions.
The instructions for use are as follows:
- Unscrew the caps on each end of the plastic housing. Gently push out the electronics assembly.
- Press the button on the battery holder repeatedly to select the desired color of the TILT. For example, press the button once to connect a red tilt or twice to connect a green tilt. To turn off the repeater, press the button repeatedly until the LED flashes red.
- Confirm the selected color by opening the Tilt app and verifying that the selected color displays an initial specific gravity of 0.000 and a temperature of 0°F (-17.8°C). Once the repeater is connected (indicated by periodic green LED flashes), it will display the actual repeated values.
- Place the assembly back into the tube and screw the caps back on. Position the repeater as close as possible to the tilt hydrometer (but still outside the fermenter) and verify that the green LED flashes indicating a connection.
Included in delivery:
- 1 TILT Repeater
|Product weight:||0,08 Kg|